AquaLab 5 MENUS
5.2 Configuration Tab
When at the configuration screen, pressing the up and down arrow
keys moves the cursor through the various configuration options.
Press the left and right arrows to page through the options. The
Enter button allows you to change the highlighted setting.
Calibration
Pressing the Enter button with Calibration highlighted starts the cal-
ibration process. For more details on the water activity verification
and calibration procedures refer to Section 7. Refer to Section 10 for
moisture content verification information (DUO model only). You
may also reset the calibration to the factory defaults by highlighting
the Defaults option and pressing Enter. This resets all options to the
way they were when the instrument arrived at your location.
19
To Next Page
Loading...
Need help?
General
