EasyManua.ls Logo

Aqualisa Aquastream Thermo User Manual

Aqualisa Aquastream Thermo
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Aquastream Thermo thermostatic integral power shower installation instuctions page 1
Aquastream
®
Thermo
Thermostatic integral power shower
The Waste Electrical and Electronic Equipment
(Producer Responsibility) Regulation 2004
This product is outside the scope of the European Waste Electrical and
Electronic Equipment Directive as interpreted within the UK.
In the UK this product can therefore be disposed of through
commercial non-WEEE waste facilities.
The original manufacturer does not accept any liability under the
WEEE directive.
Question and Answer IconNeed help?

Do you have a question about the Aqualisa Aquastream Thermo and is the answer not in the manual?

Aqualisa Aquastream Thermo Specifications

General IconGeneral
TypeThermostatic Power Shower
Outlet Connection1/2" BSP
Maximum Static Head10m
Temperature ControlThermostatic
InstallationSurface mounted
Safety FeatureAutomatic shutdown
Installation TypeExposed
FinishWhite/Chrome
Warranty2 years
Pressure Requirement0.1 - 1.0 bar

Summary

Product Components Overview

Important Information and Safety

Introduction to Aquastream Thermo

Overview of the Aquastream Thermo power shower system and contact for advice.

Critical Safety Installation Guidelines

Essential safety instructions for qualified installers regarding electrical and water supply regulations.

Pipework Flushing and Connections

Procedures for flushing pipework and connection guidelines for copper and plastic pipes.

Water Supply and System Preparation

Isolating Valves and Filters

Requirements for isolation valves and the function of the internal filter system for optimal performance.

Siting and Water Storage Capacity

Guidelines for unit siting and recommended capacities for cold storage cisterns and hot cylinders.

Gravity Fed Hot and Cold Supply

Details on connecting gravity fed systems, pipe sizing, and temperature limits for performance.

Step-by-Step Installation Guide

Initial Site Preparation

Marking fixing points, preparing entry points, and siting the transformer unit correctly.

Rear Entry Pipe Work Installation

Instructions for preparing and connecting pipes for rear entry concealed or exposed pipework.

Top Entry Pipe Work Installation

Steps for adapting the unit for top entry pipe work and securing the back plate.

Bottom Entry Pipe Work Installation

Procedure for preparing and connecting pipes for bottom entry installations.

Electrical Installation Procedures

Detailed steps for wiring the low voltage cable and making main electrical connections safely.

Slider Rail Assembly

Instructions for drilling, fitting the rail, and attaching the handset holder and hose.

Commissioning and Temperature Limits

System Commissioning Process

Steps for priming the pump, checking for leaks, and ensuring safe operation before use.

Setting Temperature Limit Stops

Guide to adjusting the temperature limiting device for maximum and minimum safe temperatures.

User Guide and Troubleshooting

Shower Operation Instructions

How to operate the on/off control, adjust flow, and set temperature for normal and boost modes.

Troubleshooting Common Issues

Guide to diagnosing and resolving problems like pump failure, poor performance, and incorrect water temperature.

Related product manuals