To Next Page
J
James SmithJul 27, 2025
How to fix no flow or low flow rate in Aqualisa Bathroom Fixtures?
- JJonathan BallardJul 27, 2025
If you experience no flow, low flow rate, or varying temperatures with your Aqualisa Bathroom Fixtures, start by checking the shower head, hose, and filters for any blockages and clean them if necessary. Ensure that the stop or service valve in the water supply pipework to the shower valve is fully open. If you have an instantaneous water heater, and it cycles on and off, increase the water flow rate or pressure through the system and contact the boiler manufacturer. Also, make sure no other water outlets are being used simultaneously and that the hot and cold feeds are working. For gravity-fed systems, flush the pipework to remove debris and airlocks.
General
