Aqualisa Q User Manual

*Auto Save Shower is a default setting, and will automatically disable if you have ignored
or confirmed NO 5 times.
Confi gure outlets
Factory
reset
Firmware update
Auto save
shower
Auto repeat
shower
ON OFF
CONFIGURE
OUTLETS
This setting enables you
to choose the icons that
represent your outlets,
and change the primary
outlet. (See page 19 for
details).
FACTORY RESET
Reset all settings to
factory settings.
(See page 24). You will
lose all of your personal
profiles and activated
settings except for the
factory defaults.
FIRMWARE UPDATE
This setting should only
be used under advice
from Aqualisa Customer
Service.
Delete
profi les
Settings
AUTO SAVE
SHOWER
If this is enabled Q
TM
will
always ask if you want to
save your shower at the
end.* This will then save
your experience in
My Q
TM
as a profile.
DELETE PROFILES
Enter this setting to
delete individual profiles
that you have set up and
no longer need. You
cannot edit a profile.
AUTO REPEAT
SHOWER
Enabling this feature will
automatically start every
shower at the same settings
as the last shower. (Please
take caution with children
and elderly). If this feature
is disabled, the shower will
start at 39ºC, Flow 5.
18

Aqualisa Q Specifications

General

Brand	Aqualisa
Model	Q
Category	Controller
Language	English