Need help?Do you have a question about the AR 25A250B and is the answer not in the manual?
Declares conformity with electromagnetic compatibility directives.
Declares conformity with safety directives for electrical equipment.
Declares conformity with RoHS and REACH regulations.
Specifies the intended laboratory use of the RF energy equipment.
Explains symbols used in the manual and on equipment for safety.
Provides essential safety guidelines for setting up the equipment.
Warns about dangerous RF voltages present on output connectors.
Emphasizes that maintenance must be done by qualified personnel.
Lists operating conditions for safe and optimal equipment performance.
Offers guidance on safely lifting heavy equipment.
Overview of the Model 25A250B amplifier and its features.
Details technical specifications of the amplifier.
Describes the power supply units and their voltage outputs.
Guidelines for selecting an appropriate operating location for the amplifier.
Information regarding the power requirements and connections.
Information on available ordering configurations for the amplifier.
Basic instructions for operating the amplifier.
Identifies and describes the amplifier's front and rear panel components.
Step-by-step guide for powering up the amplifier locally.
How to communicate with the amplifier using the IEEE-488 interface.
Instructions for remote communication via the RS-232 port.
Details on using the fiber-optic port for remote communication.
Guide for controlling the amplifier via the USB port.
Information on remote control using the Ethernet port and TCP/IP.
General information on issuing commands remotely.
Command syntax and parameters for controlling amplifier power.
Command syntax for setting amplifier gain levels.
Command to query the amplifier's identity and firmware revision.
Command to retrieve the firmware revision of the IO Board.
Command to find and interpret the amplifier's current operational state.
Command to query and identify occurring faults within the amplifier.
Overview of the RF amplifier assembly and its system components.
Explains the functionality of the RF amplifier module stages.
Details the functions and outputs of the amplifier's power supply units.
Describes the control system boards and their functions.
Explains voltage regulation for fan and preamp stages.
Provides general guidance on maintaining the amplifier's reliability.
Outlines the steps for safely disassembling the unit for servicing.
Troubleshooting steps for when the power indication fails.
Steps to resolve problems with the unit's remote operation capability.
Diagnosis and resolution for thermal fault conditions.
Procedures for identifying and clearing interlock faults.
To Next Page
General