Araknis Networks 110 Series User Manual

© 2018 Araknis Networks
®
-Return to Table of Contents-
15
Araknis Networks® X10 Series Router
User Interface Manual
Settings > System
Settings > System
System Settings Section
Here you can adjust the router’s name and IP address.
Names can be up to 63 characters long, and can contain letters, numbers, hyphens, underscores, and
periods. It cannot contain spaces.
The IP can be provided in either IPv4 or IPv6.
• If IPv4, this links to the Gatway IP Address (Settings -> LAN) of the default card
• If IPv6, this links to the IPv6 Address (Advanced -> IPv6)
The System Subnet Mask is not editable on this page. It is calculated from the router’s IP address.
Also, if the LED lights bother you, you can switch them o here (except for the power light).
Time Settings
NTP: By default, the router checks the time automatically, using the NIST (National Institute of Standards
and Technology) servers to synchronize to Coordinated Universal Time. This provides an accurate and

Araknis Networks 110 Series Specifications

General

Brand	Araknis Networks
Model	110 Series
Category	Network Router
Language	English