© 2018 Araknis Networks
®
-Return to Table of Contents-
8
Araknis Networks® X10 Series Router
User Interface Manual
Status > System
Status > System
The System Status screen provides a real-time summary of router system information, and is the first
screen that appears when you log in to the router web interface. Use the screen to verify settings and
operation of your device.
System Information Section
System Name: The user-assigned name for the device. This serves as the DHCP hostname of the device
(shown when scanning the network). Use this to dierentiate similar devices on your network.
Model Number: This is the part number for the router (as shown on our website).
Service Tag: The internal tracking number used to track every Araknis Networks product sold. This is
required to claim the device on OvrC.
Firmware Version: The version installed on the router. Keep this current using OvrC.
WAN MAC Address: The unique Media Access Control (MAC) address for the WAN port.
LAN MAC Address: MAC address of the router. The MAC address is used to configure OvrC access.
Port Overview Section
This gives an at-a-glance status for each port on the router.
Each port is color-coded based on its negotiated speed:
• Gray: Not connected to a device, or the connected device has not negotiated a speed.
• Orange: 10/100Mbps connection is active.
• Green: 1Gbps connection is active.
• Red: Port has been disabled by the user in the web interface settings.
To Next Page
Loading...
Need help?
General
