Araknis Networks 110 Series User Manual

© 2018 Araknis Networks
®
-Return to Table of Contents-
9
Araknis Networks® X10 Series Router
User Interface Manual
Status > System
Port Status Section
This provides detailed information for each porton its own line. These can be configured under Settings >
LAN > LAN Settings.
Interface: Designates the physical port on the router.
Name: Name used to identify each port.
Speed: User-selected or device-negotiated port speed.
Duplex: Displays the duplex mode of the port.
WAN Status Section
This displays current information about the WAN interface status. It updates in real time.
Two key buttons are at the bottom.
Release Button: Click to release the current WAN IP address back to the DHCP pool and receive a new one.
Renew Button: Click to renew the current WAN DHCP connection. The WAN IP address may or may not
change.
Note – The Release and Renew buttons control the network IP address.
Interface: Each WAN has its own table.
IP Address: WAN IP address of the connection.
Subnet Mask: WAN subnet mask.
Default Gateway: WAN gateway IP address.
DNS 1: WAN primary domain name server.
DNS 2: WAN secondary domain name server.

Araknis Networks 110 Series Specifications

General

Brand	Araknis Networks
Model	110 Series
Category	Network Router
Language	English