Araknis Networks 110 Series User Manual

© 2018 Araknis Networks
®
-Return to Table of Contents-
44
Araknis Networks® X10 Series Router
User Interface Manual
Advanced > IPV6
LAN Settings Section
IPv6 Address: Enter the LAN IPv6 Address.
Prefix Length: Set the IPv6 equivalent to the IPv4 subnet mask. This is done by specifying the number of
bits rather than using IP notation.
IPv6 DHCP Server: Enable or disable the IPv6 DHCP Server.
Range Start and End: Enter a starting and an ending IPv6 address for the DHCP server address range.
DNS 1 and DNS 2: Enter the primary and secondary IPv6 DNS address.
Client Lease Time: Number of minutes that a DHCP lease lasts.
WAN Settings Section
The exact appearance of this section changes with the option selected.
… With DHCP Selected
When DHCP is selected, your only option is whether to use a static DNS. To do so, click the checkbox and
enter the server addresses in IPv6 format.
… With Static IP Selected
WAN IP Address is the IPv6 address that acts as the root of the IPv6 WAN.
Prefix Length acts as the IPv6 subnet mask for the LAN side of the network.
Default Gateway Address is the IPv6 address of the router.
Finally, add the IPv6 addresses for your preferred DNS servers.

Araknis Networks 110 Series Specifications

General

Brand	Araknis Networks
Model	110 Series
Category	Network Router
Language	English