Revision Date – 22/12/2014 page 69
Place a mark on the thermistor wire where it exits
the fridge cabinet as shown.
Withdraw the thermistor wire and thermistor from
the fridge cabinet.
Disconnect the 2-pin connector from the end of
the thermistor wire where it joins the main wiring
loom.
Remove the thermistor wire (complete with
thermistor) from the fridge. Take note of the
thermistor wire path.
NOTE: It may be necessary to remove cable
ties that have been used to secure the
thermistor wire to the main wiring loom.
Place the old thermistor alongside the new one.
Transpose the mark made in the previous step
from the old thermistor wire onto the new one.
To Next Page
Loading...
