23425
AVR10/AVR20/AVR30/AV40 Software Release Notes
– 16 –
Arcam, The West Wing, Stirling House, Waterbeach, CB25 9PB, UK
Host Version 0v89/09
LCD/IAP 0.39/0.04
DSP1 00.01 / 01.10
DSP2 00.01 / 00.10
DTS 3.90.35.00
OSD 0.03
DAB 303 / 561
NET 0.100.278
BT 0.5 (or 0.7 depending on build)
Fix list:
20860: Confirmation sound not played during Google Home setup.
20878: Display could show higher sample rates as 48kHz incorrectly.
20912: DAC parameters optimised for max. SNR performance.
21032: Higher sampling rate incoming streams could have artefacts.
21066: Could lose audio when switching to Atmos stream from another stream type.
21074: Optimise USB update of network module.
21076: Improve ARC compatibility with some displays.
21077: Correct typo in display of kHz on incoming sample frequency in Input Config menu.
21081: No audio from NET input if powered on the NET input.
21088: Fix typo in speaker types menu when set to US region.
21090: HDMI Bypass in standby may not work with some displays.
21091: No zone2 audio if incoming audio stream is hi bit rate.
21099: No RS232 message to indicate no menu after sub trim times out.
21102: Dolby Digital 3.0 streams not correctly rendered.
21103: OSD shows wrong surround format if switching to an input with stream already playing.
21104: Legacy DTS in some speaker setups has audio artefacts.
21116: Analogue input shows PCM 2/0.0
21117: Correct typo in the display of stereo direct in menu > general setup > incoming format.
To Next Page
Loading...
