Arcam CR100 User Manual

CR100
E-10
AV (i.e. TV) mode

Toggles power between
stand-by and on. (Some
TVs require you to use a
number key to turn them
on.)
�
to
�
Functions as original
remote number key
– usually for channel
selection.

Selects Tape input on
amplier

Toggles between the
available inputs (e.g.
TV/AV)

Modies many keys (see
individual key descriptions,
below)

Selects multichannel
(MCH) input on amplier

(not used)
Navigate setup and
programme selection
menus. OK conrms a
selection.
Conrms a setting
(equivalent to ‘Enter’ or
‘Select’ on some remotes)

EXIT function on some
models.

Functions as original
remote key, if available.

INFO or OSD function, if
available.
Toggles the mute function,
if available.
By default this key always
operates the AMP Mute
Channel down
Channel up
Decrease (–) and increase
(+) amplier volume
Toggles TEXT page on/off
TEXT page off
Turns Programme-In-
Programme (PIP) on, if
available
Activates PIP move, if
available
Activates PIP swap, if
available
Activates PIP freeze, if
available
Activates PIP channel up,
if available

Activates PIP channel
down, if available

Duplicates function of RED
key for Text TV

Duplicates function of
GREEN key for Text TV

Duplicates function of
YELLOW key for Text TV

Duplicates function of
BLUE key for Text TV

Arcam CR100 Specifications

General

Brand	Arcam
Model	CR100
Category	Remote Control
Language	English