Arcam CR100 - VCR Mode

CR100
E-14
VCR mode

Toggles power between
stand-by and on.
�
to
�
Functions as original
remote number key.

Selects Tape input on
amplier

Toggles between available
inputs (e.g. AV1, AV2)

Modies many keys (see
individual key descriptions,
below)

Selects multichannel
(MCH) input on amplier

(not used)
Navigate setup and
programme selection
menus. OK conrms a
selection.
Conrms a setting
(equivalent to ‘Enter’ or
‘Select’ on some remotes)

Operates the Exit function
if the VCR uses this
feature

Turns on the Menu
function if the VCR uses
this feature

Toggles display between
TV and VCR
Toggles the mute function,
if available.
By default this key always
operates the AMP Mute
Channel down
Channel up.
Decrease (–) and increase
(+) amplier volume
Fast rewind
Play
Toggles pause of playback
Fast forward
Ejects tape
Stop playback
Starts recording

Displays Search menu, if
available

Red selection button (if
used)

Green selection button (if
used)

Yellow selection button (if
used)

Blue selection button (if
used)