Arcam CR100 - CD Mode

English
CR100
E-15
CD mode

Toggles power between
stand-by and on.
�
to
�
Functions as original
remote number key.

Selects Tape input on
amplier

Toggles random (‘shufe’)
play on and off

Modies many keys (see
individual key descriptions,
below)

Selects multichannel
(MCH) input on amplier

Cycles through repeat
options (track, disc, etc.)
Navigate the menus
on Arcam surround
ampliers OK conrms a
selection.
SHIFT
B
to Power on
SHIFT
C
to Power off.
Conrms a setting
(equivalent to ‘Enter’ or
‘Select’ on some remotes)

Changes the time display
modes on Arcam CD
player

(not used)

Cycles through the front
panel display’s brightness
options (dim to bright,
off).
Toggles the mute function,
if available.
By default this key always
operates the AMP Mute
Press and release to skip
back to the beginning of
the current/previous track.
Press and release to skip
forwards to the beginning
of the next track.
Decrease (–) and increase
(+) amplier volume
Fast rewind
Play
Toggles pause of playback
Fast forward
Open/close disc tray
Stop playback
Start recording (on
products that have this
feature)

Scans rst 10 seconds of
each track on CD (Audio
search)

Starts Program mode

Clears programmed item

Starts and stops A-B
repeat function

(not used)