Arcam SA35 - Selecting an Audio Input; Inputs; Analogue Audio Inputs; Input Selection

10
ARCAM SA35 OM EN V2
INPUT SELECTION
Selecting an Audio Input
Select an audio input using the left dial on
the SA35.
When using the remote control, select
Inputs from the top menu bar using the
cursor buttons. Press the OK button to
access the list.
Use the LEFT/RIGHT cursor buttons to
select your input.
Press the OK to select the input.
or
Press UP, to return to the top menu.
Bluetooth
HDMI
Phono MM
Phono MC Analogue 1
Bluetooth
HDMI
Phono MM
Phono MC Analogue 1
Digital Audio Inputs
The SA35 features two coaxial and two optical digital inputs for digital audio sources. The SA35 only supports
stereo PCM audio through these inputs.
Warning: Multi-channel audio, or encoded audio formats played through these inputs can result in loud
noise which can damage the amplifier and your speakers.
Analogue Audio Inputs
The SA35 features three stereo analogue inputs for analogue audio sources, and two phono inputs.
The SA35 support turntables with moving magnet (MM) or moving coil (MC) cartidges fitted. Each cartridge
type has a dedicated input on the rear panel. Be sure to use the correct input connection for your cartridge. If
you are not sure of the type of cartridge on your turntable, check with your dealer, or the manufacturer of your
cartridge.
Warning: Only connect a turntable to the Phono Inputs. Audio through these inputs from other devices can
result in loud noise which can damage the amplifier and your speakers.