Arcam ST5 - Menu and Settings; Menu Tree

12 ARCAM ST5 Owner's Manual EN
Menu
To access the setting menu, press the MENU button on the remote control.
To navigate the menu use the navigation buttons on the remote control.
Menu Tree
Output Type
Selects which output to use
,
Analog or Digital
with full or partial MQA decoding (where MQA
encoded content is being played).
Default is Analogue.
Volume Output
S
elects whether the
audio output
volume
is
Variable, F
ixed or
External
.
Default is Variable.
Max External Vol
Defines maximum volume sent to external amplifier.
Default is 40.
Network Standby
Selects whether the Network Connection is maintained in
standby.
Default is On.
Eco Timer
When enabled, the
ST5
will enter standby after 20 minutes with no user interaction or
playback.
Default is On.
DAC Filter
Select a digital filter for the analog
ue
outputs
.
Default is Fast.
System Reset
Press Select/OK
to initiate a reset of all settings to default
.
USB Update
Press Select/OK to initiate a software update from a USB
stick present in the USB socket on
the rear panel.
NET
Version
Displays the current
NET
software version in operation
on the
ST5
.
Host Version
Displays the
current
HOST
software version in operation on the
ST5
.
IP Address
Displays the current IP address of the
ST5
on your network
.
UNIT ID
Displays the NETWORK ID of the ST5 as identified to other devices on the network.
Supported File Formats
File Type Bit Depths Sample Rates
AAC 16 or 24 bit 44.1, 48, 88.2 or 96 kHz
AIFF 16 or 24 bit 44.1, 48, 88.2, 96, 176.4 or 192 kHz
ALAC 16 or 24 bit 44.1, 48, 88.2, 96, 176.4 or 192 kHz
FLAC 16 or 24 bit 44.1, 48, 88.2, 96, 176.4 or 192 kHz
MP3 16 bit 44.1 or 48 kHz
OGG 16 bit 44.1 or 48 kHz
WAV 16 or 24 bit 44.1, 48, 88.2, 96, 176.4 or 192 kHz
WMA 16 bit 44.1 or 48 kHz