ARCCAPTAIN CUT50 - Maintenance; Daily Maintenance

14
5. MAINTENANCE
5.1 Daily maintenance
WARNING
The power of the switching box and the cutting machine should be shut down
before daily checking (except appearance checking without contacting the
conductive body) to avoid personal injury accidents such as electric shock and
burns.
Tips:
1) Daily checking is very important in keeping the high performance and safe operation
of this cutting machine.
2) Do daily checking according to the table below, and clean or replace components
when necessary.
3) In order to ensure the high performance of the machine, please choose components
provided or recommended by dealer when replacing components.
4)
Daily checking of the cutting machine
Items Checking requirements Remarks
Front panel
Whether any of the components are damaged or loosely
connected;
Whether the output quick sockets are tightened;
Whether the abnormity indicator illuminates.
If unqualified,
check the
interior of the
machine, and
tighten or
replace the
components.
Back panel
Whether the input power cable and buckle are in good
condition;
Whether the air intake is unobstructed.
Cover
Whether the bolts are loosely connected.
If unqualified,
tighten or
replace the
components.
Side plates
Whether the side plate is loosely fixed.
Chassis
Whether the screws are loosely connected.
Routine
Whether the machine enclosure has color fading or
overheating problems;
Whether the fan sounds normal when the machine is
running;
Whether there is abnormal smell, abnormal vibration or
noise when the machine is running.
If abnormal,
check the
interior of the
machine.
Digital Welder Expert, Know You More
https://www.arccaptain.com