2
Hot workpiece can cause severe scald.
Do not touch hot workpiece with bare hands.
Cool the welding torch for a while after continuously working.
Excessive noise can be harmful to hearing.
Wear ear covers or other hearing protectors when welding.
Give warning to nearby personnel that noise may be potentially hazardous to
hearing.
Moving parts may injure your body.
Please keep away from moving parts (such as fan).
All doors, panel, cover, baffle plate, and other protective device should be closed
and well located.
Asking for professional support while trouble strikes.
When trouble strikes in installation and operation, please resort to this
manual for according contents.
If you are still in lost, or you still cannot solve the problem, please contact the
dealer or the service center for professional support.
Moving the machine can be dangerous.
Please make sure the input power switch is turned off before moving the machine.
Do not stress the operation panel and cover plate while moving the machine so that to avoid falling
items hurting others.
Please fix the wheels tightly while moving the machine with a forklift.
To avoid possible fire hazard or other damages, please do not install and operate this machine if it’s
found damaged or lack of components.
Replacing machine components can be dangerous.
Only qualified personnel can replace the machine components. Make sure there are no foreign
bodies such as wire leads, screws, gaskets and metal bars falling into the machine when replacing
the components.
Make sure the connecting wires inside the machine are correctly connected after replacing the
PCBs, and then the machine can be run. Otherwise, there is a risk of damage to property.
Digital Welder Expert, Know You More
https://www.arccaptain.com
To Next Page
Loading...
