Dishwasher / User’s Manual
47 / 53
EN
Maintenance and cleaning
4. Clean all three filters under tap
water by means of a brush.
5. Place the metal/plastic filter.
6. Place the coarse filter into the
micro filter. Make sure that it is
properly seated. Turn the coarse
filter clockwise until a "click" sound
is heard.
C
Do not use the dishwasher
without filter.
C
Incorrect placement of the
filters will reduce washing
efficiency.
Damages on the machine that may be
caused by impurities coming from the
urban supply water or your own water
installation (such as sand, dirt, rust,
etc.) can be prevented by means of the
filter attached to the water inlet hose.
Check the filter and the hose regularly
and clean them if necessary.
1. Turn off the tap and remove the
hose.
2. After taking out the filter, clean it
under running tap water.
3. Place the cleaned filter back to its
seat in the hose.
4. Install the hose to tap.
(depends on model)
To Next Page
Loading...
