38
this setting it is necessary to scroll down to menu item 6 by using the down scroll
cursor key or directly pushing number 6 on the numerical keypad:
Then press <Enter> to open the reference level submenu. In the submenu highlight
required value with the vertical cursor keys then press <Enter> to confirm selection.
Scale change
The signal level scale is set in default to 10dB/div. It can be changed to 5dB/div.
The screen can show only five menu items at a time, So, to access this setting it is
necessary to scroll down to menu item number seven or push 6 on the digital keypad.
Then press <Enter> to open the Scale submenu:
To Next Page
Loading...