72
To use the QR code,
launch the Quiver Navigator
App, set the map to your
location, and click the device
on the map that you are
connected to. A Quiver icon
will appear at the device
indicating your simulated
connection.
If you receive a
message stating more than
one devices were selected
then you can either select the
desired device from the pull-
down list, or zoom in closer to
your actual map location and
try
on the device:
Activate the QR reader
function by clicking the “QR”
button in upper left corner of
the application screen, then
place the QR code within the
focal grid. You will feel a
vibration and the screen will
return to the map screen with
additional delay details and
flags after the QR code has
been read.
To Next Page
Loading...