Argox AME-2230B User Manual (English)

Questions and Answers:

R
Robert HicksAug 14, 2025
What to do if my Argox AME-2230B shows MEMORY FULL?
- J
  Jeffrey HoodAug 14, 2025
  If your Argox Printer displays 'MEMORY FULL', it means the printer's memory buffer is overloaded with downloadable soft fonts, graphics, or forms. Review the format and size of the stored data in relation to the available memory. If the issue persists, consider seeking professional service.
C
Christy BryantAug 17, 2025
Why does my Argox AME-2230B show SERIAL I/O ERROR?
- A
  Andrea ByrdAug 17, 2025
  If you see 'SERIAL I/O ERROR' on your Argox Printer, it indicates a mismatch in the RS232 communication format or baud rate between the printer and the host device. Verify and adjust the format and baud rate settings to ensure they are consistent.
P
Phyllis EspinozaAug 21, 2025
How to resume printing if my Argox Printer is at the PAUSE status?
- M
  Monica JohnsonAug 21, 2025
  If your Argox Printer is at the PAUSE status, press the FEED button to resume normal printing mode.
D
Derek VasquezAug 25, 2025
What happens when the print head overheats on an Argox AME-2230B Printer?
- L
  lmartinezAug 25, 2025
  If your Argox Printer displays 'Print Head overheated', it has automatically paused to allow the print head to cool down. The printer will automatically resume printing once it is ready.
F
Frank BallardAug 27, 2025
What to do if my Argox Printer says 'Media out'?
- B
  Bradley WilliamsAug 27, 2025
  If your Argox Printer shows 'Media out', it means that the media is either not installed correctly or has been completely used. Ensure that you install the media correctly.
M
Mallory NelsonAug 31, 2025
What to do if Argox AME-2230B Printer fails to detect the media gaps/ black-marks?
- J
  Jamie RossAug 31, 2025
  If your Argox Printer fails to detect media gaps or black-marks, perform a media calibration before initiating the printing process.
K
Kevin BauerSep 3, 2025
What to do if my Argox Printer shows 'MEMORY FULL'?
- V
  Vicki ParkerSep 3, 2025
  The 'MEMORY FULL' error on your Argox Printer indicates that the printer's memory buffer is completely loaded with downloadable soft fonts, graphics, or forms. You should check the format and size of the stored data against the available memory size. If the issue persists, consider calling for service.
J
jefferymaysSep 6, 2025
Why does my Argox AME-2230B Printer say 'Print Head overheated'?
- P
  pamela78Sep 6, 2025
  When the Argox Printer displays 'Print Head overheated', it means the printer has entered PAUSE status to allow the print head to cool down. The printer will automatically resume printing tasks once it is ready.
Q
qmillerSep 10, 2025
How to fix SERIAL I/O ERROR on Argox Printer?
- C
  calvin42Sep 10, 2025
  A 'SERIAL I/O ERROR' on your Argox Printer suggests that the format or baud rate of the RS232 communication is inconsistent between the printer and the host. To resolve this, check the format and baud rate settings between the printer and the host.

Argox AME-2230B Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Media Thickness	0.06 - 0.25 mm
Memory	8 MB Flash
Connectivity	USB
Operating System Compatibility	Windows
Processor	32-bit RISC
Sensors	Media sensor
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	5°C - 40°C
Storage Temperature	-20°C - 60°C
Operating Humidity	85% (non-condensing)