To Next PageTo Next Page
Need help?Do you have a question about the Argox iX4 Series and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Memory | 8 MB Flash, 16 MB SDRAM |
| Resolution | 203 dpi |
| Max Print Width | 106 mm |
| Max Print Speed | 6 ips |
| Interfaces | USB 2.0, Serial RS-232, Ethernet |
| Media Sensor | Reflective sensor, Transmissive sensor |
| Media Type | Fan-fold |
| Media Width | 25.4 mm ~ 118 mm |
| Media Thickness | 0.06 mm to 0.25 mm |
| Media Roll Diameter | 127 mm (5 inches) |
| Ribbon Length | 300 m |
| Ribbon Width | 25.4 mm to 110 mm |
| Ribbon Core | 25.4 mm (1") |
| Weight | 2.5 kg |
| Power Source | AC 100-240V, 50/60 Hz |
| Supported Barcode Types | 1D: Code 39, Code 128, etc.; 2D: PDF417, Data Matrix, QR Code, etc. |
| Supported Operating Systems | Windows, Linux |
Identifies the product as the iX4 Series Wi-Fi Installation Guide.
Provides the revision date of the document as September 2018.
Covers the initial steps of preparing the device and starting the Wi-Fi module installation.
Details the process of connecting the Wi-Fi board and antenna cable to the printer.
Includes steps for tightening the antenna and closing the device cover.
Warns about the fragility of the antenna mount and potential breakage.
