Argox AME-3230 - User Manual

Questions and Answers

A
Andrew ParkerAug 15, 2025
What to do if my Argox AME-3230 Printer shows MEMORY FULL?
- R
  Renee BrownAug 15, 2025
  If your Argox Printer displays 'MEMORY FULL', it means the printer's memory buffer is overloaded with downloadable soft fonts, graphics, or forms. Review the format and size of the stored data in relation to the available memory. If the issue persists, consider seeking professional service.
M
Michael ClineAug 18, 2025
Why does my Argox AME-3230 Printer show SERIAL I/O ERROR?
- R
  rwallerAug 18, 2025
  If you see 'SERIAL I/O ERROR' on your Argox Printer, it indicates a mismatch in the RS232 communication format or baud rate between the printer and the host device. Verify and adjust the format and baud rate settings to ensure they are consistent.
M
Melanie MartinezAug 22, 2025
How to resume printing if my Argox AME-3230 Printer is at the PAUSE status?
- C
  Caroline MckeeAug 22, 2025
  If your Argox Printer is at the PAUSE status, press the FEED button to resume normal printing mode.
A
Alexander CookAug 26, 2025
What happens when the print head overheats on an Argox AME-3230?
- N
  Nicholas BishopAug 26, 2025
  If your Argox Printer displays 'Print Head overheated', it has automatically paused to allow the print head to cool down. The printer will automatically resume printing once it is ready.
R
Raymond FlemingAug 28, 2025
What to do if my Argox AME-3230 says 'Media out'?
- W
  William WaltonAug 28, 2025
  If your Argox Printer shows 'Media out', it means that the media is either not installed correctly or has been completely used. Ensure that you install the media correctly.
S
sandovalchristopherAug 31, 2025
What to do if Argox AME-3230 fails to detect the media gaps/ black-marks?
- M
  Morgan WilliamsonSep 1, 2025
  If your Argox Printer fails to detect media gaps or black-marks, perform a media calibration before initiating the printing process.
A
Amanda ObrienSep 4, 2025
What to do if my Argox AME-3230 Printer shows 'MEMORY FULL'?
- C
  charleslloydSep 4, 2025
  The 'MEMORY FULL' error on your Argox Printer indicates that the printer's memory buffer is completely loaded with downloadable soft fonts, graphics, or forms. You should check the format and size of the stored data against the available memory size. If the issue persists, consider calling for service.
J
johnathan47Sep 7, 2025
Why does my Argox AME-3230 say 'Print Head overheated'?
- P
  Peter DiazSep 7, 2025
  When the Argox Printer displays 'Print Head overheated', it means the printer has entered PAUSE status to allow the print head to cool down. The printer will automatically resume printing tasks once it is ready.
E
ellen63Sep 12, 2025
How to fix SERIAL I/O ERROR on Argox AME-3230?
- G
  greenmistySep 12, 2025
  A 'SERIAL I/O ERROR' on your Argox Printer suggests that the format or baud rate of the RS232 communication is inconsistent between the printer and the host. To resolve this, check the format and baud rate settings between the printer and the host.