Ariens 000101 User Manual

EN - 4
SAFETY RULES
The following safety instructions are based
on the EN 14910+A1:2009 specifications in
effect at the time of production.
Training
Read, understand, and follow all instructions
on the machine and in the manuals before
starting.
Be sure the area is clear of bystanders and
pets before operating. Stop machine if
anyone enters the area.
Improper use of power equipment can cause
serous permanent injury or death to the
operator or a bystander.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an Emergency
If the operator or the mechanic cannot read
the manual, it is the owner’s responsibility to
explain it to them.
ALWAYS train any inexperienced operators
and require them to read and understand all
manuals and decals.
Only allow responsible adults, who are
familiar with the instructions, to operate this
machine.
Only the user can prevent and is responsible
for accidents or injuries occurring to
themselves, other people or property.
Operator Age
DO NOT allow children under the age of 18
to operate any outdoor power equipment.
Local regulations may restrict the age of the
operator.
Children
Tragic accidents can occur if the operator is
not alert to the presence of children.
Children are often attracted to the machine
and the trimming activity. NEVER assume
that children will remain where you last saw
them.
Be alert and turn trimmer off if a child enters
the area.
NEVER allow children to operate the
machine.
Use extreme care when approaching blind
corners, shrubs, trees, or other objects that
may block your view of a child.
Keep children out of the trimming area and
in the watchful care of a responsible adult
other than the operator.
Personal Protection
DO NOT wear loose clothing or jewelry and
tie back hair that may get caught in rotating
parts.
Wear adequate outer garments.
Wear adequate safety gear and protective
gloves.
DO NOT operate machine barefooted or
while wearing sandals. ALWAYS wear
substantial footwear.
ALWAYS wear eye and ear protection when
operating machine.
Before Operating
Keep all nuts and bolts tight to be sure the
equipment is in safe working condition.
Maintain the machine to be in compliance
with the maintenance schedule.
Clean grass and debris from unit, especially
from around muffler and engine, to help
prevent fires.
Inspect unit before each use for missing or
damaged decals, shields and correctly
functioning operator presence control
(OPC). Replace or repair as needed.
Ensure operator presence control (OPC) is
functioning properly. DO NOT operate unit if
OPC is damaged or disabled.
NEVER tamper with safety devices. Check
their proper operation regularly.
Clear work area of stones, sticks, wire and
foreign objects which might be picked up
and thrown. Tall grass can hide obstacles.
Keep machine free of grass, leaves, or other
debris build-up. Clean up oil or fuel spillage
and remove any fuel-soaked debris.
Before using, ALWAYS visually inspect to
see that the cutting elements are not worn or
damaged. Replace worn or damaged cutting
elements in sets to preserve balance.

Ariens 000101 Specifications

General

Brand	Ariens
Model	000101
Category	Trimmer
Language	English