ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8 634
•
P1055-INS-RA
•
PAGE 7
Driver Side Installation Pictured
(Fig 16) Remove both block offs from bumper
(arrow). NOTE: Pictured from behind bumper
(Fig 17) Before reinstalling the bumper
cover/grille, cover edges on brackets with
removable tape (masking tape for example).
Carefully guide bumper cover/grille assembly
over the bumper brackets and back into position.
(Fig 19A) Reinstall the Grille Guard
Front
(Fig 18) Reinstall Top Support Brackets
To Next Page
