EasyManua.ls Logo

Aries S224045 User Manual

Aries S224045
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may
contain abrasives that could damage the finish.
For stainless steel, polish may be used to clear small scratches
and scuffs on the finish. Mild soap may be used also to clean the product.
Always start threaded fasteners by hand and finish tightening with a wrench.
Do not use an impact driver as this may result in cross-threading and cause
damage to the side bar.
Level of Difficulty
Easy
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL S224045
Parts List
1 Driver / left side bar
1 Passenger / right side bar
8 Mounting bracket, universal
13 Clip nut, 8mm
17 Hex bolt, 8mm x 25mm
17 Flat washer, 8mm
17 Lock washer, 8mm
17 Hex bolt, 10mm x 30mm
19 Flat washer, 10mm
18 Lock washer, 10mm
1 Bolt plate, 10mm
2 Hex nut, 10mm
1 Plastic bolt retainer, 10mm
1 Def-tank L-bracket
1 Def-tank support bracket
Tools Required
Ratchet Socket, 16mm
Wrench, 16mm Socket, 13mm
Level
PAGE 1 • S224045-INS-RC • 800.798.0813 • NEED ASSISTANCE? ARIESAUTOMOTIVE.COM
Question and Answer IconNeed help?

Do you have a question about the Aries S224045 and is the answer not in the manual?

Aries S224045 Specifications

General IconGeneral
BrandAries
ModelS224045
CategoryAutomobile Accessories
LanguageEnglish

Summary

Parts and Tools

Parts List

Detailed list of all components included in the installation kit.

Tools Required

List of necessary tools for performing the installation.

Installation Procedure

Prepare Mounting Locations

Locate vehicle mounting tabs and attach initial brackets using specified hardware.

Install Brackets

Secure brackets to vehicle body using clip nuts and hex bolts.

Mount Side Bars

Position side bars onto installed brackets and loosely attach with hardware.

Align and Tighten Hardware

Ensure side bars are level and parallel, then fully tighten all fasteners.

Diesel Truck Bracket Installation

Install DEF-tank specific brackets for diesel models.

Maintenance and Final Checks

Notes and Maintenance

Guidance on protecting the product finish and performing periodic inspections.

Related product manuals