Aries 204032 User Manual

PAGE 1 • 204032-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Brackets and Hardware
Passenger Side
Front Mounting
Bracket
Driver Side
Front Frame Bracket
Driver Side
Rear Support Bracket
Driver Side
Rear Frame
Bracket
Driver Side
Front Mounting
Bracket
Passenger Side
Front Frame Bracket
Passenger Side
Rear Support Bracket
Passenger Side
Rear Frame
Bracket
(2) M12 x 40mm Long Bolt
Plates
(6) M12 x 40mm Long
Bolt Plates W/Welded
Washer
(2) M12 x 45mm
Short Bolt Plates
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may
contain abrasives that could damage the finish.
For gloss black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL 204032
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.
Parts List
1 Driver / left, side bar
1 Passenger / right, side bar
1
Mounting bracket, driver / left, front
1 Mounting bracket,
passenger / right, front
1 Frame bracket, driver / left, front
1 Frame bracket,
passenger / right, front
1 Frame bracket, driver / left, rear
1 Frame bracket,
passenger / right, rear
1
Support bracket, driver / left, rear
1 Support bracket,
passenger / right, rear
6 Bolt plate, long, welded washer
M12 - 1.75 x 40mm
2 Bolt plate, long, M12 - 1.75 x 40mm
2
Bolt plate, short, M12 - 1.75 x 45mm
4 Hex bolt, M12 - 1.75 x 35mm
10
Flat washer, M12 x 25mm x 2.5mm
8 Flat washer, M12 x 30mm x 3mm
14 Lock washer, M12
14 Hex nut, M12
10 Plastic spacer washer, M12
8 Hex bolt, M10 - 1.50 x 25mm
2 Hex bolt, M10 - 1.50 x 35mm
4 Flat washer, M10 x 20mm x 2mm
8 Flat washer, M10 x 25mm x 2mm
10 Lock washer, M10
2 Hex nut, M10

Aries 204032 Specifications

General

Brand	Aries
Model	204032
Category	Automobile Accessories
Language	English

Summary

Product Components and Specifications

Parts List

Lists all included parts for installation, including side bars, brackets, and hardware.

Brackets and Hardware

Visual identification of brackets and hardware components used in the installation process.

Torque Specifications

Details torque values for various bolt sizes (M6, M8, M10, M12, etc.) for secure installation.

Notes and Maintenance

Provides essential pre-installation advice, tool recommendations, and product care instructions.

Installation Procedure

Driver Side Installation Steps

Step-by-step instructions for installing the driver side sidebar, including bracket mounting.

Passenger Side Installation

Instructions to repeat the installation process for the passenger side sidebar.

Final Alignment and Tightening

Guidance on final alignment, adjusting, and fully tightening all hardware for safety.

Periodic Inspection

Recommendation for regular checks to ensure all hardware remains secure and tight.