Aries 2074150 User Manual

PAGE 1 • 2074150-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Parts List
1 Driver / left side rocker step
1 Passenger / right side
rocker step
12 Flat washer, M8
12 Lock washer, M8
12 Hex bolt, M8 - 1.25 x 30mm
Tools Required
Ratchet Extension
Socket, 12mm Torque wrench
Socket, 13mm Level
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL 2074150
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.

Aries 2074150 Specifications

General

Brand	Aries
Model	2074150
Category	Automobile Accessories
Language	English

Summary

Installation Steps

Step 1: Passenger Side Location

Locate mounting points on the passenger side of the vehicle and align the rocker step.

Step 2: Prepare for Mounting

Remove hex bolt plugs and align rocker step mounting holes with vehicle points.

Step 3: Secure Rocker Step

Attach the rocker step using M8 hex bolts, lock washers, and flat washers, snuggling hardware.

Step 4: Secure Middle and Rear Mounts

Repeat steps 1-3 for the middle and rear mounting points, then tighten hardware to specs.

Step 5: Passenger Side Installation

Complete installation on the passenger side and perform periodic inspections of hardware.

Notes and Maintenance