Aries 2074106 User Manual

PAGE 1 • 2074106-INS-RB • 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may
contain abrasives that could damage the finish.
For black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Level of Difficulty
Easy
Scan
for helpful
install tips
Front
Rear
INSTALLATION MANUAL 2074106
Torque Specifications
METRIC
M6 bolt 3 ft.-lbs.
M8 bolt 7 ft.-lbs.
M10 bolt 16 ft.-lbs.
M12 bolt 28 ft.-lbs.
SAE
1/4" bolt 3 ft.-lbs.
5/16" bolt 7 ft.-lbs.
3/8" bolt 16 ft.-lbs.
7/16" bolt 20 ft.-lbs.
1/2" bolt 28 ft.-lbs.
Tools Required
Ratchet Torque wrench
Socket, 13mm Level
Flathead
screwdriver
Parts List
1 Driver / left rocker step
1 Passenger / left rocker step
8 Clip nut, M8
8 Hex bolt, M8 - 1.50 x 30mm
4 Bolt plate, M8
12 Flat washer, M8
12 Lock washer, M8
4 Hex nut, M8
4 Bolt retainer, plastic

Aries 2074106 Specifications

General

Brand	Aries
Model	2074106
Category	Automobile Accessories
Language	English

Summary

Installation Notes and Maintenance

Product Care and Maintenance

Instructions for protecting and cleaning the product, including waxing and using mild soap for finishes.

Installation Steps

Step 1: Locate Mounting Points

Identify the three mounting locations on the driver side underneath the vehicle.

Step 2: Prepare Mounting Holes

Remove hole plugs and insert clip nuts into designated holes for mounting.

Step 3: Install Bolts and Retainers

Remove hole plugs and insert M8 bolts with plastic retainers into mounting holes.

Step 4: Mount Rocker Step

Align rocker step brackets with vehicle mounting points and secure hardware.

Step 5: Repeat for Passenger Side

Repeat installation steps 1 through 3 on the passenger side of the vehicle.