Hybrid electric water heater (WiFi model) – OPERATING AND MAINTENANCE INSTRUCTIONS FOR THE USER
122
The device will not update automatically. Reset the time to switch from daylight saving time to winter time. The display
flashes, showing the hours and the minutes. If a key is not pressed within 10 seconds, the system will exit the time
setting without saving any changes.
Press the keys to set the correct hour and press the key to confirm. Press the
keys again to select the minutes and to confirm.
If the hour is not set, the ON/OFF key will flash.
7.9 Information menu
The information menu allows for visualising data for monitoring the product.
To enter the menu, ensure the product is ON and press the key for 3 seconds.
Press the and keys to select parameters U1...U5
Once the parameter involved has been identified, press the set key and then press the
keys to change the value. To return selecting the parameters, press the “MODE” key
(The appliance will automatically exit the menu if no key is pressed within 10 seconds).
Parameter Name Parameter description
U1 NIGHT Night function status (see sect. 7.5)
U2 COOLING Cooling function status (see sect. 7.6)
U3 ANTIBACTERIAL
Anti-legionella function status (see sect. 7.11)
U4 T Safety Max Maximum possible temperature setting status
U5 Reset Auto Reset the i-MEMORY algorithm
To Next Page
Loading...
