User Manual for CD3403 Page 13
OVERVIEW OF THE OPTIONS AVAILABLE
The following flowchart provides an overview of all the options available from the CD34 alarm system. It also
shows the keypad keys you need to press in order to arrive at the options. The symbols used to represent
the keys are as follows:
Accept X Reject ↓ Move forward ↑ Move backward
OPTION LIST FOR THE CD34
There are six main menu options in this system. Depending on how the system has been programmed, your
code may not give you access to all of the options. If you want to access more options than you currently are
able to, contact your installer.
The menu options let you carry out the following operations:
Name of menu option What it lets you do
1. Arm Menu The sub-options allow you to carry out the following operations:
• Normal Set Set the alarm
• Partguard Set the alarm with zones excluded by the
installer
• Set (No Buzzer) Set the alarm with no exit time
• Forced Arm Set the alarm with all open zones inhibited,
except exit/entry zone(s) and access
zone(s)
• User menu Return to previous menu
2. Inhibit Exclude zone area(s)
3. Chime/Bell Test
Enable or disable the chime
Confirm that the buzzer and internal/external bells are operationa
4. E. Log/Time/Date
Display engineers log
Change current time
Change current date
5. Change Codes
Change own code(s)
Change codes Change own or all other codes
User Options Change the user attributes
Code count 99 Program the number of times code 8
(temporary code) can be used (maximum 99
times)
6. Operator Log Detailed list of activations and system operations. This log will be cleared
each time the system is armed
0. Finished? Exit the system. Time and date display appears.
To Next Page
Loading...
Need help?
General
