Page 4 User Manual for CD3403
INTRODUCTION
Thank you for choosing an ARITECH security system. When properly maintained, the system will provide
years of reliable operation.
This manual explains how to use the ARITECH CD34 series for every day use. There is a more detailed
manual available for managers which explains how to carry out a wider range of operations.
The CD34 is a burglar alarm system which can detect an (attempted) break-in using connected detectors,
magnetic contacts, etc., generating an alarm.
The manual uses symbols to show when you must enter information into the keypad, and when the system
emits a beep. Examples of these symbols are shown below:
code +
You need to enter information into the keypad. What you have to enter is on the
right of the symbol. In this example you should enter your code and then press
the Accept key ().
Beeeep
The buzzer on a key switch or keypad emits a long beep. Short beeps can also
be emitted - this is indicated with the text ‘Beep Beep’.
Your system has been programmed with one or two entrance times and one exit time. These are pre-set
amounts of time that let you enter and leave the premises through specific routes without activating an
alarm. Be sure you know which routes you can use to leave and enter the premises.
Entrance time: _________________ seconds Exit time: _________________ seconds
Second entrance time: _________________ seconds
To Next Page
Loading...
Need help?
General
