Arjo Enterprise 8000X - 1 Introduction

7
1. Introduction
These instructions contain information for the installation, use
and maintenance of the Arjo Enterprise
®
8000X acute care
hospital bed. These beds have multiple functions to provide
the optimum nursing position for both patient and caregiver.
Standard features:
• Folding split side rails with integrated controls
• Electrical adjustment of bed height and leg section
elevation
• Electrically operated retracting backrest
•Bio-Contour
®
advanced profiling system
• Auto-Chair facility
• Electrical adjustment of head down tilt (Trendelenburg)
and foot down tilt (reverse Trendelenburg)
• Manual selection of calf section vascular position
• Mattress support surface with removable panels
• Adjustable length mattress platform
• Drainage bag rails
• Underbed lights
• 125mm single wheel castors
Optional features:
• 150mm (single or dual wheel) castors
• Bedstripper (linen shelf)
• 5th Wheel
• DIN accessory rails
• Lockable foot board
• Full width brake bar
• Radio translucent backrest with X-ray cassette tray
• IndiGo™ Intuitive Drive Assist
• Foot Pedal for Adjustment of Bed Height
• Foot-end mounted Attendant Control Panel (ACP)
Optional features are specified by the customer at the time of
ordering. The chosen options are indicated by the equipment
model number.
NOTE
Do not combine curved deck sheets with flat deck sheets.