Apply brakes on bed.
Fold down bed rail on transfer side if any.
Place sliding aid under patient.
Apply brakes on Sara Combilizer.
A
C
B
Do not raise or lower
other equipment
6
54
1
2
3
Position Sara Combilizer close to the bed (A).
Adjust Sara Combilizer height to 5 cm (2 inches) above the bed (B).
Lower Sara Combilizer on top of the bed for an even transfer (C).
Put armrests in horizontal position (A).
Adjust foot support (B) away from patient’s feet.
Detach and fold away all safety belts (C) on side facing bed.
Fold down shoulder support (B) on the bedside
on Sara Combilizer.
A
B
C
Continue with steps on next page
Apply brakes
Lock side
support
08.KC.05EN_1 • 06/2020 • Page 3/6
To bed
To Next Page
Loading...
