11
Set Up Your System
Add an Arlo Pro 2 Camera to an Existing Arlo
Account
¾ To add an Arlo Pro 2 camera to an existing Arlo account:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
2. Tap or click Add Device.
3. Follow the onscreen instructions.
Sync Your Cameras With the Base Station
¾ To sync your cameras:
1. Place the camera 1 to 3 feet (30 to100 centimeters) from the base station.
Note: Cameras must be synced one at a time.
2. Press the Sync button on the top of the base station for about two seconds
and then release the button.
3. Wait for the Sync status LED to blink green.
To Next Page
Loading...
