Arlo Pro 2 - Automatically Stop Recording When Motion Stops; Change Audio Sensitivity

47
Modes, Rules, and Smart Alerts
Automatically Stop Recording When Motion Stops
¾ To automatically stop recording when motion stops:
1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
3. Tap or click the device whose mode that you want to edit.
If you use only one device, it is preselected.
4. Tap or click Edit next to the mode that you want to edit.
5. Under Then do the following, tap or click Edit next to Record video.
6. Select Record until activity stops (up to 300 sec).
Change Audio Sensitivity
¾ To change audio sensitivity for a camera:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the camera.
A list of modes displays.
4. Tap or click Edit next to Armed.
The Edit Rule page displays.
5. Tap or click Edit next to the rule.
The Edit Rule page displays.