Figure 2-5 Mictor 38 connector pinout .................................................................................................... 2-39
Figure 2-6 MIPI 34 connector pinout ....................................................................................................... 2-41
Figure 2-7 MIPI 60 connector pinout ....................................................................................................... 2-43
Figure 2-8 User I/O connector pinout ...................................................................................................... 2-46
Figure 3-1 Point-to-point signal ............................................................................................................... 3-48
Figure 3-2 Stub length ............................................................................................................................ 3-48
Figure 3-3 Long stub causing false edges .............................................................................................. 3-49
Figure 3-4 Improved route with shorter stub ........................................................................................... 3-49
Figure 3-5 JTAG connection without buffers ........................................................................................... 3-51
Figure 3-6 JTAG connection with TDO buffer ......................................................................................... 3-51
Figure 3-7 Daisy-chained JTAG connection without buffers ................................................................... 3-51
Figure 3-8 Daisy-chained JTAG connection with TCK buffers ................................................................ 3-52
Figure 3-9 Fully buffered JTAG connection ............................................................................................. 3-52
100893_0100_06_en Copyright © 2017–2019 Arm Limited or its affiliates. All rights
reserved.
7
Non-Confidential