EasyManua.ls Logo

Armitage Shanks Sensorflow 21 - Supply Conditions; Water Regulations

Armitage Shanks Sensorflow 21
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
3 SUPPLY CONDITIONS
Abbreviations & terminology used
PSU: Power Supply Unit, either mains, battery or link versions.
PCB: Printed Circuit Board inside the PSU.
LINK PSUs: (up to 5 max) can be connected in series to a single mains PSU. Permit-
ting washroom with multiple products to be run from a single mains supply point.
4 WATER REGULATIONS
The ttings covered by this installation and maintenance instruction should be installed in
accordance with the water regulations published in 1999*, therefore Armitage Shanks would
strongly recommend that these ttings are installed by a professional installer
*A guide to the Water Supply (Water Fittings) Regulations 1999 and the Water Byelaws 2000, Scotland is published by WRAS (Water
Regulations Advisory Scheme) Unit 13, Willow Road, Pen-y-Fan Industrial Estate, Crumlin, Gwent, NP11 4EG.
ISBN 0-9539708-0-9
These products are factory tted with a regulated PCA outlet, this outlet will function correctly at pres-
sures greater than 1 bar. For lower pressure systems t the unregulated ow straightener supplied. For
more outlet details see section 8
Unregulated full-flow
flow straightener
(SUPPLIED IN BOX)
Regulated PCA
outlet (> 1.0 bar)
(FACTORY FITTED)
MAX.
5,0
OVER
1,0
P
T
°C
bar
MAX. 80
MIN.
0,5
UPTO
1,0
40
Recommended

Related product manuals