Armstrong The Brain DRV25 User Manual

15
Armstrong International
221 Armstrong Blvd., Three Rivers, Michigan, 49093 - USA
armstronginternational.com/brain
Installation - DRV25
Before tting to the pipework, it is recommended
that connectors are tted to the inlets and outlet.
This will enable the DRV to be easily removed,
if required.
Flush pipework thoroughly
(minimum of 5 minutes).
Fit the DRV to the pipework.
Grounding is required, connect the power
cable to the primary power supply via switched
circuit breaker with a 3 Amp fuse or a 15 Amp
grounding-type receptacle (socket).
Do not t or replace a power cable plug!
Ensure the LED on the DRV goes through the
initial power up sequence.
Commission the DRV25 and recirculation
system using the following instructions...
1
2
3
4
5
6
®
THE BRAIN
DRV25
®
THE BRAIN
DRV25
®
THE BRAIN
DRV25

Armstrong The Brain DRV25 Specifications

General

Brand	Armstrong
Model	The Brain DRV25
Category	Control Unit
Language	English