Armstrong The Brain DRV25 User Manual

9
Armstrong International
221 Armstrong Blvd., Three Rivers, Michigan, 49093 - USA
armstronginternational.com/brain
Default Settings
DRV25 is preprogrammed to customer requirements prior to shipment
The settings are derived from the Installation Detail Form (IDF) lled out by the customer when placing an order.
The Installation Detail Form (IDF) is available to download at www.armstronginternational.com/brain
or consult factory
Reference Drawing Number: ________________________
Armstrong Model Number: _________________________
Section 3 – DRV Setpoint Programming Detail
The Brain® Mixed Water Outlet Temp Setpoint: ________ °F
SAGE® (BS) No: Yes:
If Yes - Select ProtoCessor, or SAGE® for the Web
SAGE® for BAS Interface Protocol Options
BACnet™ IP
BACnet™ Metasys N2
BACnet™ MSTP
LonWorks™
Modbus RTU
Modbus TCP
SAGE® for the Web
Complete SAGE® IDF
(Fee-Based Subscription Options)
Armstrong International – Hot Water Group
221 Armstrong Blvd., Three Rivers, Michigan 49093 - U.S.A. Phone: (269) 279-3602 • Fax: (269) 279-3130
armstronginternational.com
© 2019 Armstrong International, Inc.
Digital Recirculating Valve (DRV) • Digital Mixing Center (DMC) • SAGE® (BS)
In order to enter P.O.’s and guarantee delivery dates, a technically accurate and complete IDF is required.
The review and acceptance of the information on the IDF by Armstrong:
1.Approves the order for processing which triggers an e-mail confirmation
2.Indicates that AHWG supports you by endorsing the application
3.Initiates the warranty
4.Delivers a complete, AHWG supported performance guarantee to the final user of the product
5.Drives the relevant point of specification/influence, point of installation and point of order financial allocation if appropriate
Minimum Recirc: Each DRV25 requires 2 gpm.
Each DRV40 requires 5 gpm. Each DRV50 or
DRV80 requires 10 gpm
List Any Non-Standard Options or Details Here:
Inlet Hot Water Temp to DRV: ________ °F
Inlet Hot Water Pressure to DRV: ________ PSI
Inlet Cold Water Temp to DRV: ________ °F
Inlet Cold Water Pressure to DRV: ________ PSI
Maximum System Demand: ________ GPM
Continuous Recirc to DRV: ________ GPM
DRV25 for Group Control:
Section 1 - Ordering Processing/Tracking Detail:
Point of Order / Sold To: _____________________________________________________________ (eg: ABC Mechanical)
City: __________________________ State: _____ Rep Firm: ______________________________
Point of Installation: ________________________________________________________________ (eg: Heinz Ketchup)
City: __________________________ State: _____ Rep Firm: ______________________________
Point of Specification: ______________________________________________________ (eg: DEF Consulting Engineers)
City: __________________________ State: _____ Rep Firm: ______________________________
Other Influence: ___________________________________________________________ (eg: Source of Recommendation)
Installation Details Form (IDF)
Section 2 – DRV & Installation Site Details
Size: DRV25 DRV40 DRV50 DRV80

Armstrong The Brain DRV25 Specifications

General

Brand	Armstrong
Model	The Brain DRV25
Category	Control Unit
Language	English