The Handle Extension Block HEB-2 mounts to the front end of the CCH-
1 and adds one more focus hook to the camera in a high position,
allowing the tape measure to clear the matte box.
8.5 Side Camera Handle SCH-1
The Side Camera Handle SCH-1 is used in conjunction with a BAT-V or
BAT-G top-mounting battery adapter, or with third-party onboard
recorders. It is attached to the camera using three captive 3mm hex
socket head screws (two at the front and one at the back). Ensure that
the SCH-1 is securely fastened before attempting to lift the camera from
it.
If a tall battery or a tall third-party onboard recorder is used, the
adjustable center grip of the SCH-1 can be replaced by the taller
Adjustable Center Grip Tall (ACG-2).
To Next Page
Loading...
