14 Motor layout
5.2 Status LED
The status LED of the SETUP button indicates the current motor status.
LED Status
Solid green Motor is ready and calibrated, no
warnings
Green/red flashing Motor is calibrated, but no motor mas-
ter available (idle)
Yellow flashing Motor is currently calibrating
Green/yellow flashing Motor needs to be calibrated (calibra-
tion request)
Solid yellow Motor is in calibration timeout state
Solid red Motor power supply is below 10V
Red flashing No LBUS data is available
Green flashing Motor is in passive mode
To Next Page
Loading...
Need help?
General
