Arris DCX3510 - Video Format Indicators; M-Card Usage

Operation
High-Definition All-Digital Dual Tuner DVR Set-top DCX3510-M • User Guide 5
365-095-25384-x.1
Video Format Indicators (Front Panel Display)
The front panel display of the DCX3510-M set-top is equipped with indicators to the right hand
side of the display that are used to indicate the currently-selected video output format on the
component video (YPbPr) and HDMI outputs.
The DCX3510-M set-top is capable of providing the following video formats on the YPbPr and
HDMI video outputs:
• High Definition 1080i (1920 x 1080 pixels)
• High Definition 720p (1280 x 720 pixels)
• Enhanced Definition 480p (720 x 480 pixels)
• Standard Definition 480i (720 x 480 pixels)
The DCX3510-M set-top is also capable of passing through High-Definition 1080p 24/30/60
(1920 x 1080 pixels) source content over the HDMI video output.
If you cannot get a video display when the DCX set-top is connected to your television via
component video or standard HDMI cables, use the User Settings Menu to optimize the
DCX3510-M set-top display settings for your television.
Note: Availability of certain features is dependent upon application support.
M-Card™
The M-Card is required to view cable television programs, previously recorded programs on the
DVR, or interactive on-demand programs. The M-Card should not be removed.