Connecting Your DCX Set-top
High-Definition All-Digital Dual Tuner DVR Set-top DCX3510-M • User Guide 10
365-095-25384-x.1
Connecting an HDTV — Single Connection for Video/Audio
Connecting an HDTV — Single Connection for Video/Audio
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the DCX
set-top.
HDMI
If your TV has an HDMI input, this is for both audio and video if you are using the TV speakers.
Connect a Standard HDMI cable to the TV and to the HDMI connector on your DCX set-top.
IEEE-1394
If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your video and
audio connection. Connect an IEEE-1394 cable to the IEEE-1394 connector on your HDTV and
DCX set-top.
Note: On-screen graphics will not be displayed when you are using the IEEE-1394 connection on the
rear panel of the DCX set-top. Refer to On-Screen Graphics for more information.
If you have an audio/video receiver and are not using your TV’s speakers, go to Connecting an
A/V Receiver — Audio.
To Next Page
Loading...
