Configuring the User Settings
High-Definition All-Digital Dual Tuner DVR Set-top DCX3510-M • User Guide 26
365-095-25384-x.1
User Settings Menu Main Screen
To configure the DCX3510-M settings on the main User Settings menu screen, first power off
the DCX3510-M using either the remote control or the Power button and then press the MENU
key on the remote control. If the TV is on, the on-screen User Settings menu lists the DCX3510-
M settings that can be adjusted.
If no HDMI device is connected to the DCX3510-M, the default User Settings menu appears as
follows:
Figure 11: Default User Settings Menu when no HDMI connection is in place
If the DCX3510-M is connected via HDMI to a display device such as a television, the default
User Settings menu is updated to reflect this information. The YPbPr Output menu option is
replaced with the HDMI/YPbPr Output menu option as shown in the following example.
To Next Page
Loading...
