Arris Touchstone TM3202G - Using the Reset Button; Booting from Battery

Chapter 7: Using the Telephony Modem
Release 32 STANDARD 1.2 August 2016 Touchstone TM3202G Telephony Modem User Guide
© 2015-2016 ARRIS Enterprises LLC. All Rights Reserved. 35
Cable Modem Startup Sequence
US/DS Online Description
Slow Flash
(1/second)
Off Downstream acquisition in progress
On
(until Upstream
acquisition starts)
Off Downstream acquisition completed
Fast Flash
(3/second)
Off Upstream acquisition in progress
On
Slow Flash (during
acquisition)
On (when modem IP
address obtained)
Upstream acquisition completed, ready
for service
Using the Reset Button
Use the Reset button, on the back of the Telephony Modem, to reset the modem and perform
initialization as if you power cycled the unit. You may need to reset the Telephony Modem if
you are having problems connecting to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The Reset button is recessed to
prevent accidental resets.
1. Tel 1
2. Tel 2
3. Reset button
4. Ethernet
5. Cable
6. Power
Booting from Battery
The TM3202G supports a “Boot from Battery” feature that allows the Telephony Modem to
provide continued telephone service during power outages.