Touchstone TM502 Telephony Modem User’s Guide 27
Getting Battery USB Ethernet
Safety Started Installation Installation Drivers Configuration Usage Troubleshooting Glossary
Installing USB Drivers
Follow these steps to install USB drivers on a supported Windows oper-
ating system.
Note: Depending on your operating system, the dialog boxes shown
on your computer may differ slightly from those shown in this
procedure.
1 Make sure the Telephony Modem is on (the Power light should be
on). If not, connect the power supply as described in “Connecting
the Telephony Modem” on page 24.
2 Insert the Touchstone USB Drivers CD.
3 Plug the appropriate end of the USB cable into the Telephony Mo-
dem and the other end into the computer’s USB port.
The PC displays the following window:
—continued—
To Next Page
Loading...
