Offering a superb level of sound quality, the SLA-1's clean and powerful circuitry combined
with a straightforward user interface quickly and easily delivers the power you need for
professional and project studio sound amplification. The SLA-1 has been designed for studio
and even live applications, and has been engineered to provide excellent sound with ultra-
low noise and distortion.
The SLA-1 has a long list of impressive features, including a Toroidal Transformer, XLR & ¼"
Inputs, Ground Lift Switch, SmartFan Silent Cooling Design, Power, Clip, Signal and Protect
LED's, One IU Spacing and a frequency response of 10 Hz to 40 kHz.
The SLA-1 is rated at 100 watts rms/channel @ 8 ohms (130 watts rms/channel @ 4 ohms),
hum and noise >100dB, input impedance of 22k ohm unbalanced (44k ohm balanced). It
has an input sensitivity of 1V for rated power into 8 ohms, SmartFan Silent Cooling System and
custom heat radiating fins. The SLA-1 is a powerful, compact amplifier that occupies 1 IU unit
and weighs 6kg. Its rugged, steel chassis is designed for durable and reliable use.
The SLA-1 is perfect for pro, project and home studios, and is a perfect compliment to the
new ART SLM-1 Studio Linear Monitors. The two together are a fantastic combination of both
audio quality and of value!
Studio Linear Amplifier
SLA-1
SLA-1SLA-1
FEATURES:
TOROIDAL
TRANSFORMER
100 WATTS/
CHANNEL
@ 8 OHMS
260 WATTS/
BRIDGED
MONO @
8 OHMS
10 HZ to 40 KHZ
WITHIN 1dB
XLR & ¼"
INPUTS
GROUND LIFT
SWITCH
SMARTFAN SILENT
COOLING SYSTEM
MULTI-WAY
BINDING POST
OUTPUTS
LOW PROFILE
1U RACK
MOUNTABLE
DESIGN
EXTREMELY LOW
NOISE, DISCRETE
LINEAR DESIGN
ALL STEEL
CHASSIS
PERFECT FOR
PROFESSIONAL
AND PROJECT
STUDIOS
APPLICATIONS:
Features and specifications subject to change without prior notice.
Copyright 2001 Applied Research and Technology.
APPLIED RESEARCH AND TECHNOLOGY, 215 TREMONT STREET, ROCHESTER, NY 14608 USA
Voice: 716/436.2720, Fax: 716/436.3942, http://www.artproaudio.com
Dimensions 1.75”H x 19.0”W x 9.5”D
Weight 13.2 lbs., 6.0kg.
Input Connections XLR (balanced), 1/4” TRS
(balanced/unbalanced)
Output Connections Multi-Way Binding Posts
Input Impedance XLR, 1/4” 44k ohms (balanced),
22k ohms (unbalanced)
Input Sensitivity 1V for Full Power Output into 8 ohms
Stereo Output Power, 8 ohms 100 watts RMS per Channel
Stereo Output Power, 4 ohms 130 watts RMS per Channel
Bridged Output Power, 8 ohms 260 watts RMS mono
CMRR >60dB (typical @1kHz)
Frequency Response 10Hz to 40kHz, +/- .5dB
Hum and Noise >100dB below clipping
Total Harmonic Distortion (THD) <0.05% (typical)
Transformer Type Toroidal
Power Requirements USA - 120vac 60 Hz 600 watts (max).
Export units configured for country of
destination.
Project, Home and Commercial Recording Studios, Broadcast/Radio/TV, Live Sound Systems/PA,
Permanent/Fixed Installations, Church, Club and Practice PA Systems, DJ Sound Systems
SPECIFICATIONS:
Need help?
Power
Output Power
Weight and Dimensions
