29
Mode Button
This Mode button has a unique feature. It is a quick memory button. If any pumps and/or light
is on, quickly press and release the Mode button, and all systems will turn off. If you quickly
press and release the Mode button again, all of those systems will turn back on. For example,
if you have pump 1, pump 3, and the lights on and quickly press and release the Mode button
then pump 1, pump 3, and the lights will all turn off. The next time you quickly press and
release the Mode button, *if no system is on, then pump 1, pumps 3, and the lights will come
on again.
*If you have any system on when you press and release the Mode button, that system will be
the new memory stored on the Mode button.
Pump Buttons
The number on the button represents the pump that it activates and the corresponding icon will
show on the display.
To ensure proper functionality and component longevity, individual jet pumps must not
be cycled on and off more than one time every minute.
Touch the “Jets” button once to activate the pump for the jets. Touch the “Jets” button again to
turn off the pumps.
A built-in timer automatically turns the pump off after a period of 15
minutes, unless the pump has been manually deactivated first.
Light Button
Press the “Light” button to turn the light on and off. If left on, the light automatically turns off
after 4 Hours.
The Up/Down button
This button is used to adjust all settings Up or Down.
Temperature Operation
To Next Page
Loading...
